This product complies with GB14085.5-2001 eqv IEC60947-1: 1999 standard. 

 WARNING! This product is generally three-phase power supply side of the sample shall not be installed on the output side of the inverter current 
 Structural characteristics of 

 1) Installation: The protector base rail, which consists of two M4 screw structure, directly and independently install the or HT35 rail installation. 

 2) Indicator: 5 indicator to indicate: normal phase (voltage three-phase unbalanced), reverse phase, overvoltage, undervoltage. 

 3) Dimensions: 68mm × 30mm × 76mm. 

 4 protection features 

 1) lack of protection: refers to the protected line in the running state or non-running state, any one phase to phase failure fault, delay 2S action. 

 2) Reverse phase protection: to prevent the L1, L2, L3, three-phase AC phase sequence is wrong a protective measure, delay 2S action. 

 3) voltage unbalance protection: a measure of protection refers to the safe operation of three-phase voltage imbalance will affect the line, unbalanced three-phase rate = 100%> 10% protection delay 2S action. 

 4) Over voltage protection: refers to the protection of the line voltage is higher than the set value, delay 3 ~ 8S action and restore back to a difference of 6 ~ 20VAC. 

 5) The undervoltage protection: refers to the protection of the line voltage drops below the set value, delay 3 ~ 8S action, recovery hysteresis 3 ~ 20VAC. 

 5 The main technical data 
 Supply of the GMR-32B, the GMR-32B, the GMR-32B sale 
 1) The main circuit: 

 1) Rated voltage: 220VAC, 380VAC, 440VAC, 460VAC. 

 2) The main circuit wiring: insulated copper-sectional area of ??1.0 ~ 2.5mm. Single strand of copper wire directly into the terminal; the use of flexible cord must be plus pin lug on the wire, in order to ensure a reliable connection. 

 2) The auxiliary circuit: 

 1) electrical inseparable normally open and normally closed contact. 

 2) Category: AC15, DC13 

 3) Contact capacity: 250VAC 2.5A, 30VDC 1.5A 

 4) Conventional heating current: 5A 


 GMR-32B GMR-32B1 GMR-32B3 GMR-YK-32B GMR-32BD GMR-32BT GMR-32BH GMR-32BL GMR-22A GMR-32 
 Three-phase power protection device, the phase sequence protection ABJ1-14CY manufacturers total distribution 
 Three-phase power protection, phase sequence protection the GMR-the 32B ABJ1-12W manufacturers, the total distribution 
 Three-phase power protection, the total distribution of the GMR-52B manufacturer of the phase sequence protection 
 Three-phase power protection ABJ1-14WAX manufacturers of the total distribution 
 The total distribution of the three-phase power protection the GMR-32B manufacturers 
 Three-phase power protection device 
 The total distribution of the three-phase power protection the GMR-32B3 manufacturers 
 The total distribution of the three-phase power protection of the GMR-YK-32B manufacturers 
 The total distribution of the three-phase power protection the GMR-32BD manufacturers 
 The total distribution of the three-phase power protection the GMR-32BT manufacturers 
 The total distribution of the three-phase power protection the GMR-32BH manufacturers 
 The total distribution of the three-phase power protection the GMR-32BL manufacturers 
 The total distribution of the three-phase power protection the GMR-22A manufacturers 
 The total distribution of the three-phase power protection the GMR-32 manufacturers 
 高标准R-IT 高标准R-ZT 高标准R-AT 高标准R-NT 高标准R-IS 高标准R-ZS 高标准R-AS 高标准R-NS 

 Product Overview GMR series multi-function power protection (also known as three-phase power monitor phase sequence protection, over voltage protection device, etc.) is mainly used in AC 50/60Hz, rated voltage below 460V, industrial three-phase 220V, 380V, 440V, 460V and other voltage levels of a variety of fault detection, three-phase input power supply voltage is too high, too low voltage, phase loss, reverse phase (phase sequence), three-phase voltage imbalance protection products are widely used air compressors, electric motors, power distribution box, pump, pumps, central air conditioning unit, electric control boxes, power distribution cabinets, cranes, etc., such as central air-conditioning compressor protection, the power to monitor all kinds of elevators, pumps, pump anti-phase The reverse phase protection is indispensable for normal industrial equipment operation, maintenance of equipment operating voltage protection products. This product complies with GB14085.5-2001 eqv IEC60947-1: 1999 standard. WARNING! This product is generally three-phase power supply side of the sample shall not be installed on the output side of the inverter current 1) installation of the structural characteristics: the protector base rail, which consists of two M4 screw structure, directly and independently installed or HT35 rail installation. 2) Indicator: 5 indicator to indicate: normal phase (voltage three-phase unbalanced), reverse phase, overvoltage, undervoltage. 3) Dimensions: 68mm × 30mm × 76mm. Protection features 1) lack of protection: means the protection circuit in the running state or non-running state, any one phase to phase failure fault occurs, delay 2S action. 2) Reverse phase protection: to prevent the L1, L2, L3, three-phase AC phase sequence is wrong a protective measure, delay 2S action. 3) voltage unbalance protection: a measure of protection refers to the safe operation of three-phase voltage imbalance will affect the line, unbalanced three-phase rate = 100%> 10% protection delay 2S action. 4) Over voltage protection: refers to the protection of the line voltage is higher than the set value, delay 3 ~ 8S action and restore back to a difference of 6 ~ 20VAC. 5) The undervoltage protection: refers to the protection of the line voltage drops below the set value, delay 3 ~ 8S action, recovery hysteresis 3 ~ 20VAC. 5 Main technical data 1) the main circuit: 1) Rated voltage: 220VAC, 380VAC, 440VAC, 460VAC. 2) The main circuit wiring: insulated copper-sectional area of ??1.0 ~ 2.5mm. Single strand of copper wire directly into the terminal; the use of flexible cord must be plus pin lug on the wire, in order to ensure a reliable connection. 2) The auxiliary circuit: 1) electrical inseparable a normally open and normally closed contact. 2) Use category: AC15, DC13 3) Contact capacity: 250VAC 2.5A, 30VDC 1.5A) Conventional heating current: 5A the GMR-32B of the GMR-32B1-32B3, the GMR the GMR-YK-32B the GMR-32BD the GMR-32BT the GMR- 32BH GMR-32BL GMR-22A GMR-32 three-phase power protection, phase sequence protection ABJ1-14CY manufacturers of the total distribution of three-phase power protection, phase sequence protection GMR-32B ABJ1-12W manufacturers of the total distribution of three-phase power protection device phase sequence protection, the GMR-52B, the GMR-52B1F manufacturers of the total distribution of three-phase power protection ABJ1-14WAX manufacturers of the total distribution of three-phase power protection the GMR-32B manufacturers of the total distribution of three-phase power protection the GMR-32B1 manufacturers distribution of three-phase power supply protector GMR-GMR-32B3 manufacturers distribution of three-phase power protection device GMR-YK-32B manufacturers distribution of three-phase power protection GMR-32BD manufacturers of the total distribution of three-phase power protection the GMR-32BT manufacturers distribution of three-phase power protection device the 32BH manufacturers of the total distribution of three-phase power protection GMR-32BL manufacturers of the total distribution of three-phase power protection device GMR-22A manufacturers of the total distribution of three-phase power protection the GMR-32 manufacturers distribution 高标准R-IT 高标准R-of ZT 高标准R-AT 高标准R-NT 高标准R -IS 高标准R-ZS 高标准R-AS 高标准R-NS GMR-32 

 Phase power protection devices, phase sequence protection ABJ1-14CY 
 Three-phase power protection devices, phase sequence protection GMR-32B ABJ1-12W 
 Three-phase power protection devices, phase sequence protection GMR-52B 
 Three-phase power protection device ABJ1-14WAX 

 The GMR-the 32B ABJ1-12W three-phase AC protection relay, three-phase power protection 
 Three-phase AC protection relay, three-phase power protection, phase sequence the protector ABJ1- 
 ABJ1-14WBX 
 ABJ1-14FP 
 ABJ1-12W, 
 ABJ1-14W 
 ABJ1-19AH 
 ABJ1-18AY 
 ABJ1-18DY 
 ABJ1-14FY 
 ABJ1-122 
 ABJ1-14WFX 
 ABJ1-12W 
 ABJ1-10W 
 ABJ1-12, 
 ABJ1-122, 
 ABJ1-14FY, 
 ABJ1-18AH, 
 ABJ1-18DY 
 , ABJ1-19AH 
 ABJ1-14CY 
 -14WBX 
 ABJ1-14WBX I plant developed the production of three-phase AC protection relay mini Product Features: broken dynamic phase, static phase loss, voltage unbalance, out of phase, over voltage, under voltage protection, power supply rated voltage: 380VAC voltage is not The balance of rate setting: 8% over-voltage: 437VAC less voltage: 323VAC protection delay: 3S rated working voltage: 240VAC, 24VDC rated operating current: 1A (AC-14, DC-13) 
 >> View Details 

 CE certification 
 I produced ABJ1-12W, ABJ1-14W models have advanced technology and price advantage, and to the international market in 2003, marketing in the European Union, the Middle East and Southeast Asia. 
 >> View Details 

 System certification 
 I produced the ABJ1 series and ABJ1 of-W Series is the National Quality Center Quality Management System Certification 
 >> View Details 

 -19AH 
 The three-phase AC detector ABJ1-19AH I plant independent R & D and production with load protection AC three-phase monitoring and protection relay products A, B, C, function: dynamic breaking phase, static phase loss, voltage unbalance, out of phase, over overvoltage, undervoltage monitoring. a, b, c function: dynamic break phase, static phase failure, voltage unbalance monitoring. Ambient temperature:-25oC ~ +55 oC Relative humidity: <90% of rated voltage: 380VAC ± 20% 50 ~ 60HZ voltage unbalance rate settings:> View Details 

 -18AH 
 The ABJ1-18AY independent research and development of my factory production with load protection three-phase AC protection relay products A, B, C functions: dynamic breaking phase, static phase loss, voltage unbalance, out of phase, overvoltage and undervoltage protection. a, b, c function: dynamic break phase, static phase failure, voltage unbalance protection. Rated voltage: 380VAC working voltage: 380VAC ± 20% voltage unbalance rate settings: 800% over-voltage protection setting: 420VAC undervoltage protection settings: 340VAC protection delay: 5S-phase protection delay: 1S recovery to delay: 5Min rated working voltage (contact): 240VAC, 24VDC nominal operating current (contact): 1A (AC-14, DC-13) 
 >> View Details 

 -18DY 
 ABJ1-18DY independent research and development of my factory production with load protection Adjustable three-phase AC protection relay products. The model has two phase failure and voltage unbalance monitoring sensors to monitor the contacts of the AC contactor. This monitoring method is a unique patented product of our company. ABJ1-18DY models have been used in Dalian Refrigeration Co., Ltd. and Wuhan McQuay Air Conditioning and Refrigeration Co., Ltd., compressor protection control system for more than five years, trouble-free, has good reliability, and monitor comprehensive and many other advantages. A, B, C, function: dynamic breaking phase, static phase loss, voltage unbalance, out of phase, overvoltage and undervoltage protection. a, b, c function: dynamic break phase, static phase failure, voltage unbalance protection. Power supply rated voltage: 380VAC voltage unbalance rate settings: 8% over-voltage protection setting: 420VAC undervoltage protection settings: 340VAC response time: 5S recovery delay: 5Min rated working voltage (contact): 240VAC, 24VDC rated operating current (contact): 1A (AC-14, DC-13) 
 >> View Details 

 -14FY 
 The ABJ1-14FY independent research and development of my factory production with load protection three-phase AC protection relay products A, B, C functions: dynamic breaking phase, static phase loss, voltage unbalance, out of phase, overvoltage and undervoltage protection. Power supply rated voltage: 380VAC voltage unbalance rate settings: 8% over-voltage protection setting: 428VAC undervoltage protection setting: 332VAC response time: 5S recovery delay: 5Min electric shock to the form of: 2C rated working voltage (contact): 240VAC, 24VDC nominal operating current (contact): 1A (AC-14, DC-13) 
 >> View Details 

 -122 
 ABJ1-122 is the independent research and development of my factory production with load protection three-phase AC protection relay products A, B, C functions: dynamic breaking phase, static phase loss, voltage unbalance, wrong relative to the protection of the working power Rated voltage: 380VAC voltage The balance of rate setting: 8% response time: 2S electric shock in the form: 2C rated working voltage (contact): 240VAC, 24VDC nominal operating current (contact): 1A (AC-14, DC-13) 
 >> View Details 

 -14WFX 
 ABJ1-14WFX I plant developed the production of three-phase AC protection relay mini Product Features: broken dynamic phase, static phase loss, voltage unbalance, out of phase, over voltage, under voltage protection, power supply rated voltage: 380VAC voltage is not balance rate is set to: 8% over voltage: 428VAC Undervoltage: 332VAC response time: 3S rated working voltage: 240VAC, 24VDC nominal operating current: 1A (AC-14, DC-13) 
 >> View Details 

 -12W 
 ABJ1-12W, I plant developed the production of three-phase AC protection relay mini product features: wrong phase protection, dynamic breaking phase, static phase failure, voltage unbalance power supply rated voltage: 380VAC voltage unbalance rate settings: 8% response time: 2S rated working voltage: 240VAC, 24VDC rated operating current: 1A (AC-14, DC-13) 
 >> View Details 

 -10W 
 ABJ1-10W, I plant developed the production of three-phase AC protection relay mini product features: the wrong phase to protect the power supply rated voltage: 380VAC response time: 1S rated working voltage: 240VAC, 24VDC nominal operating current: 1A (AC-14, DC-13) 
 >> View Details 

 Three-phase AC to protect to relay ABJ1-W Series 
 ABJ1-□ □ W □ □ series three-phase AC protection relay micro product development and production of this company. : Overcurrent protection function according to different models